Licensed fence installers for wood, vinyl, chain link and aluminum fences

Licensed fence installers near you.

Wood, vinyl, chain link and aluminum. One verified installer dispatched. Free video quote, no bidding.

Find a qualified fence installer for any yard, property or commercial site

A fence does more than mark a boundary. It keeps kids and pets safely in the yard, adds real privacy to outdoor living spaces, boosts curb appeal and can meaningfully raise home value. But the difference between a fence that stands straight for twenty years and one that leans within two seasons comes down entirely to who installs it.

Contractor Palace connects homeowners and property managers with licensed fence installers who set posts at the right depth, pull the required permits, locate buried utilities before digging, and build to local code. We dispatch fence contractors for wood privacy fences, vinyl fences, chain link, aluminum, farm fence, pool fence and electric gate installations across Ohio.

Core servicesWhat fence installers handle

What a fence installation contractor does

fence

Wood Fence

Wood is the most versatile fencing material and the top choice for homeowners who want a natural look with privacy. A professional wood fence installer sets pressure-treated posts in concrete at frost depth, uses rot-resistant cedar or pine for rails and pickets, and applies a sealant or stain to extend the life of the wood. Wood fence styles include privacy, picket, split rail and board-on-board.

home_work

Vinyl Fence

Vinyl fence never needs painting or staining and holds its color for decades. It does not rot, splinter or corrode. A vinyl fence installer uses heavier gauge posts and wider spacing than wood because vinyl panels span longer sections. Quality vinyl fence carries a lifetime warranty from the manufacturer. Popular styles include privacy, semi-privacy, rail fence and decorative picket.

security

Chain Link

Chain link fence delivers perimeter security at a lower cost per linear foot than wood or vinyl. It is the standard choice for large properties, rental units, commercial yards and dog runs. A professional installer stretches the fabric tight, seats terminal posts in concrete and installs tension bars and bands to keep the fence rigid and gap-free along the bottom.

balcony

Aluminum and Ornamental

Aluminum fence is the maintenance-free alternative to wrought iron. It carries a powder coat finish that resists rust and chipping without annual repainting. Aluminum is commonly used for pool enclosures, front yard borders and decorative perimeters where you want visibility with a clean, formal appearance. A licensed installer sizes the posts correctly for your soil type and sets them at the depth required for your fence height.

The processThree steps

How to book a fence installer

1

Describe your fence project

Tell us your property address, approximate linear footage, fence type and height, and whether you need gate openings. Photos of the yard and any existing fence to be removed help our matching. Note whether you have an HOA with style restrictions or know of any buried utilities.

2

Get matched with a licensed fence installer

We match you with an insured fence installation contractor who installs your chosen material and has experience in your municipality's permit process. One installer, not three competing bids and three sales calls from companies you did not vet.

3

Review the written scope and book

Your matched installer provides a written proposal covering linear footage, materials, post depth, gate hardware, permit responsibility and a firm price before any work starts. You hold payment on the platform until the fence is standing, gates are swinging and you have signed off on the job.

Full scopeEvery fence type we install

Fence types we dispatch for

check_circle

Privacy fence

Full-height board-on-board or solid panel fence for backyard privacy. Wood and vinyl are both available. Six-foot height is the most common for residential use.

check_circle

Picket fence

Classic three-to-four-foot decorative fence for front yards and garden borders. Available in wood, vinyl and aluminum with dozens of picket styles.

check_circle

Split rail fence

Rustic two- or three-rail fence for rural properties, large lots and acreage. Sets posts and rails without panels for an open, country look.

check_circle

Chain link

Galvanized or vinyl-coated chain link in heights from three to eight feet. Standard for perimeter security, rental properties and commercial yards.

check_circle

Aluminum fence

Powder-coated aluminum fence for pool enclosures, front yard borders and ornamental perimeters. Rust-proof with no painting required.

check_circle

Farm fence

High-tensile wire fence, welded wire and T-post fence for agricultural properties and large acreage. Built to contain livestock and mark boundaries across long runs.

check_circle

Pool fence

Code-compliant pool enclosure fence with self-closing, self-latching gates. Required by law in most Ohio municipalities for inground and above-ground pools.

check_circle

Electric gate

Automated sliding or swing gate with motor, remote or keypad entry. Installed as part of a new fence or added to an existing driveway opening.

Hiring guideWhat to look for

How to choose a fence installer

Fencing looks straightforward but bad installation causes expensive problems: leaning posts, gaps at the bottom that defeat the purpose of the fence, wood that rots in three years instead of fifteen, and pool fences that fail code inspection. Here is what to verify before signing anything:

verified

Licensing and insurance

Ohio does not issue a single statewide contractor license for fencing, but your municipality may require a home improvement contractor registration. More importantly, any installer working on your property must carry general liability insurance. Ask for a certificate of insurance naming your address before work begins. An uninsured crew that hits a gas line while digging leaves you with an uninsured problem.

verified

Property survey and setbacks

Your fence must sit on your property, not your neighbor's. Most Ohio municipalities also require setbacks from the property line for front yard fences. Ask whether the installer will locate your survey stakes or whether you need to provide them. A contractor who skips this step is taking your word for where the property line is, which creates a serious dispute risk after the fence is built.

verified

Permit knowledge

Most Ohio cities require a permit for fences above a certain height. The installer who pulls the permit is responsible for meeting code, not you. Ask specifically who handles the permit application and inspection. Unpermitted fences can be ordered removed by the city and will cause problems when you sell the home.

verified

Post depth and concrete

Posts must be set below the frost line to prevent heaving. In Ohio, that is typically 36 to 42 inches. Ask what depth the installer sets posts and whether they use concrete or gravel. Gravel is faster to install but allows post movement over time. Concrete-set posts last significantly longer and are required for tall privacy fences and gates.

verified

Warranty

A professional fence installer should warranty their labor for at least one year. Materials carry separate manufacturer warranties: vinyl fence is typically lifetime, wood posts are warranted by the pressure treatment rating. Get the labor warranty in writing with a clear scope of what it covers before work starts.

Pricing2025 cost guide

Fence installation costs: 2025 ranges

Wood privacy fence (per linear foot)$15 to $30
Vinyl fence (per linear foot)$20 to $40
Chain link fence (per linear foot)$8 to $18
Aluminum fence (per linear foot)$20 to $35
Average 150-ft yard (installed)$2,000 to $6,000
Single walk gate (wood or vinyl)$150 to $400
Double drive gate$400 to $900
Electric gate with motor and keypad$1,200 to $3,500
Old fence removal (per linear foot)$3 to $8

Ohio estimates. Final cost depends on terrain slope, soil type, gate count and whether an existing fence requires removal. Properties with rocky soil or significant grade changes cost more because post installation takes longer. Contractor Palace quotes include a full written scope before work begins so you know exactly what is covered.

Common questionsAnswered

Frequently asked questions: fence installers

What does a fence installer do?

A fence installer surveys your property line, digs post holes to the correct frost depth, sets posts in concrete and installs fence panels, rails and gates. A professional installer calls 811 to locate buried utilities before digging, handles the permit application and ensures the fence sits on your property and meets local setback requirements. They also remove and haul away old fencing when replacing an existing structure. Gate work includes hanging gates on correct hardware and adjusting for level operation.

How much does fence installation cost?

Wood privacy fence runs $15 to $30 per linear foot installed. Vinyl fence costs $20 to $40 per linear foot. Chain link runs $8 to $18 per linear foot. Aluminum fence costs $20 to $35 per linear foot. For a typical 150-foot residential yard perimeter, expect $2,000 to $6,000 depending on material and number of gates. Properties with sloped terrain, rocky soil or significant old fence removal add to the total. Get a written per-linear-foot quote with materials specified before committing.

How do I find a fence company near me?

Ask whether the company carries general liability insurance and can provide a certificate of insurance. Confirm they call 811 before digging and know your municipality's permit requirements. Ask how deep they set posts and whether they use concrete. Get a written quote that lists material, post depth, gate hardware and permit responsibility separately. Contractor Palace pre-screens every fence installer in our network for insurance, permit knowledge and installation quality before they can take jobs through our platform.

Do I need a permit for fence installation?

Most Ohio municipalities require a permit for fences over four to six feet in height, and some require permits for all fences regardless of height. Permit rules also differ by yard location: front yard, side yard and rear yard often have separate height limits and setback rules. HOA communities frequently add restrictions on material, color and picket style on top of city rules. A qualified fence installer handles the permit application and knows the rules for your specific address.

How long does fence installation take?

A standard residential backyard fence for a typical 150-foot perimeter takes one to two days for a two-person crew. Post concrete needs 24 to 48 hours to cure before panels are installed, so some jobs span two days with a concrete cure day in between. Larger properties, sloped terrain or significant old fence removal extend the timeline. Electric gate installation adds a half to full day depending on gate style, motor type and whether a conduit run to power is required.

Ohio citiesWhere we dispatch

Fence installers in Ohio cities we serve

We match homeowners with licensed fence installation contractors across all major Ohio metro areas. Click your city for local fence pages with city-specific pricing and installer availability.

Also seeRelated services

Related services on Contractor Palace

Need a fence installer? Get matched free.

Post your fence job and get connected with a licensed, insured fence installer. Wood, vinyl, chain link, aluminum and electric gates all handled.

Get my free fence installation quotearrow_forward